Latest

Mono-strand

The galvanizing sheath produced by TTM in Italy varies in thickness from 0.025 mm – 0.6 mm. The sheath metal provides corrosion protection with excellent…

Continue Reading


Pocket formers are produced for single strand applications in order to create, by means of special reusable plastic moulds, recesses that allow sealing after anchorage tensioning. All pocket formers are mounted only on active anchorages applications.

Continue Reading


The sheaths of polyethylene SPE series are made according to the specifications FIB HDPE extruded in bars with variable length between 5.8 and 11.8 meters. The junction is heat-proof, and manufactured only in the color blue.

Continue Reading


Anchoring: active member, such as “1ED15-A18”, is made with the anchor strand and inserted in a polyethylene conduit, application environments where protection is required in the casting complex obtained by passivation.

Continue Reading


For use on slabs, preassembled cables can be supplied with the passive anchorage preblocked at one end, which are ready for the installation on site and assembled from factory.

Continue Reading


The anchorage: passive, unbonded and encapsulated, “1EX15-D2” type. It is made with the total encapsulation of the polyethylene covered anchorage, with the greased strand covered in polyethylene. The “1EX15-D2” anchorage is unbonded, it is supplied passive, factory prelocked or to lock on site by using a B300KN jack. This application is typical of industrial floors, foundation piles, diaphragms and slabs in a highly corrosive environment for the whole system.

Continue Reading


“LX” series plates are designed for the application to plates or slabs. The main characteristic of this anchorage is its dimensions AxB, where the shorter side is suitable for limited thickness plates.

Continue Reading


This wedge is designed for anchoring single or multiple strands on anchor plates. It is for disposable use and it is available for different applications.

Continue Reading


Connection G Series Download .PDF The connection on single strand cables is carried out by using a sleeve that allows to guarantee their connection. It can be bonded “G” and unbonded “GX”. Both applications can be used with all the versions of an active anchorage.

Continue Reading


Single strand anchorages are divided into the following bonded and unbonded types and applications. Anchorages are available in the following versions: 1E15, 1ED15, 1EX15, 1EXD15…

Continue Reading