Permanent TPE-17 anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground requires increasing the adherence of the bulb by transferring a homogeneous rectangular strength to the ground and not a triangular one as with common anchors.
Permanent TPS-11 ground anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground does not have any particular geo-technical problems and where anchors must be removed after use, but they must guarantee a permanent service at the same time.
Permanent TPF-12 ground anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground does not have any particular geo-technical problems and where ground anchors must be totally removed after use, but they must guarantee a permanent service at the same time. Anchors can be removed by means of extruded anchors with a resistance calculated according to the removal value required.
Permanent TPE-22 anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground has particular geo-technical problems in the presence of strata under pressure and where the containment of hydraulic pressure and the use of permanent ground anchors are required during the installation.
Permanent TPE-19 ground anchors are usually used to hook avalanche protection ropes to respond to accidental loads caused by falling rocks or avalanches.
Permanent TPE-15 ground anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground has serious highly corrosive geo-technical problems in the presence of groundwater, where an increased adherence of the bulb is required. The TPE-15 anchor is totally encapsulated, all its parts are encapsulated in polyethylene, thus ensuring a total protection (hermetic of all its components).
TPE-13 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011, CIT 02-2013 and 03-2013, and with the European and Italian Standards.
TPE-08 permanent anchors are produced in compliance with the Ministerial Decree as of 14.01.2008, Decree no. 12391 22.12.2011, CIT 02-2013 and 03-2013, and with the European and Italian Standards.
TPE-07 permanent ground anchors are usually used in the construction of bulkheads and diaphragms, where the type of ground presents highly corrosive and serious geotechnical problems with the presence of strata, where a total protection is required. The TPE-07 anchor is totally encapsulated, all its parts are encapsulated in polyethylene, thus ensuring a total protection (hermetic of all its components).
The permanent TPE-05 anchor is usually used in the construction of bulkheads and diaphragms, where the type of ground presents particular geotechnical problems which require the repeated, selective, radial regrouting I.R.S., in the whole foundation.