Accessories

Products

All the tubes used are 16x20 mm. In special cases, where the insertion of all the tubes is difficult due to dimensions, 11.5x14 mm o…

The double piston for I.R.S. groutings type XG27-600is produced with a highly resistant spring, allowing flexibility; it compensates for the natural deviations of the valvate…

DD0015-CV bush covers guarantee protection against corrosion on elementary anchorages, both on temporary and on permanent anchors. DD0015-CV are particularly effective on applications with temporary…

All permanent anchors have an end cap connected to the corrugated protection sheath. The plastic end cap is fixed to the corrugated sheath with a…

All permanent anchors have an end cap connected to the corrugated protection sheath. The plastic end cap is fixed to the corrugated sheath with a…

DD-DS internal spacers are designed to allow the anchor in the foundation to guarantee the sinusoid effect of the strands inside the corrugated sheaths, as…

The DE150KN load cell is designed for the installation on ground anchors, and in particular on single strands anchored to plates. Their shape and dimensions…

DD-RC connections are made for corrugated sheaths. They allow to connect sheaths by adapting different diameters and with enlargements and narrowings. They can be screwed…

In an aggressive environment, the anchor head must be immediately protected, both with temporary and with permanent anchors. The protection inside the heat provides an…

The DD-SF spherical support allows the installation of temporary and permanent ground anchors. The spherical cap rests on a support that transfers the force to…

The purpose of the under plate protection is to provide an effective connection/protection between the sheath of the free length and the anchorage.